Redundant Internet access for your mission critical Home Automation setup

Introduction

When you decide to setup your own infrastructure in order to depend less on cloud providers, whether it be for saving money (depending on what you will be doing) or just for the sake of improving the technical knowledge, having more control, or both, you know you will be flying solo, at least to some extent. 

Turning a doorbell switch into a home security camera...and still retain its original function

Today there is an off-the-shelf solution for practically every average-Joe-grade idea one may have. There is always the chance that when one thinks of something that could have a practical purpose and cover a specific need, that there is already a product in the market that will do that function.

Even though home automation may still be in its infancy, today we see a market practically flooded of solutions that one way or another aim to respond in terms of comfort, or to help improve the home experience, or even to enhance the safety and security of its occupants.

Reducing the bill of materials of my Hardware Watchdog timer

One nuance of the first few iterations of any new design is that rarely comes optimized in every important aspect from scratch.

It is very difficult to cover everything, when we are creating something new from the ground up. The creation process is by itself a very good sink of our cognitive energy and focus, leaving little room for a more pedantic mode of thought.

Continuing with the Kiosk project

It is fairly interesting that just as with other "things" that I have equipped my house with, this Kiosk and other IoT gadgetry proved to be of relevance not just for my geek person, but for my family as well. For example my wife likes to keep track of the vacuum cleaner progress. Having its map and progress show up automatically when it starts cleaning, proved to be quite useful in this sense:

Attempting to repair a Vorwerk TM31 Bimby / Thermomix

At the beginning, when in my house we decided to purchase this kitchen food processor/blender almost 10 years ago, I considered it to be somewhat of an overpriced consumer asset in spite of the multiple features that it enclosed. Still I went with the hype and gave some credit to how much it could make life easier, in particular when it came to cooking meals and otherwise more complicated recipes.

Configuring Home Assistant to run off of a USB drive in a incompatible Raspberry Pi

 A problem with the earlier generations of Raspberry Pi's, especially the Pi 1 and the Pi 2 up to version 1.1, is that these cannot be configured to boot from an external USB storage device.

This is a particular relevant limitation for a number of reasons, including the fact that relying on an SD card for most of the storage needs is a solution that may have limited endurance.

The later versions of the Raspberry Pi (RPi 2 v1.2 and upwards), already offer some form of allowing external USB media to boot the operating system. 

Improving an RPI 2 based Home Assistant server for reliability and performance

For some time I have been using the same Raspberry Pi 2 v1.1 as the infrastructure for my Hass.io instance. It proved to perform quite reliably over the approximately 18 months I have been using it 24x7. From that time during approximately 1 year I used the same SanDisk Ultra XC I 64 GB MicroSD card:

Just for precaution I have later switched to a similar card, a SanDisk Ultra HC I 32 GB, and moved my Hass.io installation onto it: