Ad

Friday, November 22, 2019

Attempting to reverse engineer a home automation oriented smart-meter - Part 1

In my quest to make my house smarter, but still looking forward to keep having control over it, I have been doing some additions which I plan to further document here, in the short term.

In the meantime I thought it would be more relevant to share my findings in regard to a device a bit more "exhotic" than the Sonoff boxes we are all used to. This device is a sort of a miniature smartmeter that fits in a DIN rail next to the circuit breakers.



Just like the Sonoff modules, it also pairs with your WLAN, and connects to a cloud service. Instead of the eWeLink cloud to which Sonoff devices connect to, in this case it connects to another relatively popular cloud service called Tuya.

Wednesday, October 30, 2019

Waking up devices in Hass.io (Home Assistant)


This is a quick post on a challenge I had to overcome while integrating my SmartTV (an LG TV 55UJ620V) with Hass.io.

I wanted Hass.io to be able to turn on the TV (as such allowing automations to be built on top of it, or for example turning it on through a voice command via Google Assistant). As such I first resorted to using the Home Assistant Wake on LAN built in integration (https://www.home-assistant.io/integrations/wake_on_lan/). It kind of worked, but was not very reliable (perhaps 2 out of 5 times it would work).

I knew that by definition, the way that (Wake-up On LAN) WOL is implemented is inherently unreliable: essentially the target (dormant) device is expecting a frame with a specific pattern of bytes. If it receives that frame, it wakes up the host, otherwise nothing happens. The device will normally scan for that pattern of bytes in the frame regardless of the type of transport level protocol it may be on top of. In the case of WiFi in particular, there is the probability (high or low, depending on the network conditions) of that single frame not reaching the destination. This probability increases with the more hops we have in between.

With this Hass.io implementation I was requiring the magic packet to be sent from a host (the Raspberry Pi where I keep Hass.io running) that is in a separate router vlan, from where the TV is (these are connected via Ethernet and WiFi respectively):


Monday, October 28, 2019

Building a kick-ass home automation by reflashing the Sonoff devices with Tasmota and getting it all working with hass.io

For some time I have been gradually bringing more devices to my house, which are either designed or having features allowing these to be integrated to a home automation system.

In spite of all the concerns that can arise from bringing smart/connected devices to the place where you expect personal privacy to exist, the convenience of having these ends up speaking louder overall..

It all started with having a set of unrelated devices in the house, each featuring connectivity and some cloud-based features provided by the vendor. This is the case for the Xiaomi Rockrobo vacuum cleaner, the Sonoff switches, the multimedia devices such as the TV set (an LG smartTV), and also the Google Chromecast and Assistant devices.