Once again bumping into questionable product safety standards

About 6 months ago, I replaced the manual plastic pump I used to have for dispensing water from 5+ litre jugs, with what would in principle be a more sophisticated and convenient approach: looked for an electric water dispenser, and without much searching, found several options. Most, if not all were unfortunately designed to fit into the 19 litre office water bottles. Without any alternative, ordered one of these, considering that I would have to come up with some custom adaptation if I wanted to use it with the 5 litre bottles. Ended up ordering the one below, for its minimally elegant design and compact dimensions:

Car DVR replacement and related shenanigans - part 2

Moving along with more details, like I mentioned in the previous post, the rear camera was reused from the previous installation. This CCD based camera happens to be superior to the basic CMOS camera bundled with the kit. Both in terms of the quality of the sensor itself and its low light sensitivity, but also regarding the lens, featuring a wider viewing angle (important given its role as a backup camera).

The only change however was a substantial improvement in the mounting design, by having added an U-shaped plate in the rear of the camera, with a 4-screw mount instead of the original 2 screws attached to the sides of the camera. This provides a more solid attachment to the L-shaped aluminium parts that in turn stick to the door through an adhesive:

Car DVR replacement and related shenanigans

Introduction

With the vulgarisation of miniature cameras and computing devices of all sorts, technologies that fundamentally serve the mobile industry become cheap enough and available to the point of being useful for other purposes. That is the case of DVR devices for automotive use.