Ad

Sunday, June 23, 2019

DSLR Intervalometer - Source code made available in GitHub


For those who remember my work back in the days with implementing an intervalometer for Nikon cameras (yes, in spite of it being rather simple to implement in the camera firmware itself, these larger brands prefer to classify such a feature as premium and make it available only in more expensive DSLRs), I have detailed in the following post, the solution that I have put together:

https://www.creationfactory.co/2012/03/timelapse-intervalometer-technology.html

Saturday, June 15, 2019

Yet another product safety issue - a self-balancing electric scooter, a.k.a. "Hoverboard"

Considering all the fuss about this particular type of personal transportation gadget having been responsible for numerous fire incidents, given that it is already part of a distant past (by modern perception), I took the chance of buying one of these units, going for a cheap one. My expectation was that this industry had some time to mature and learn with all the beating they received from the press and these incidents:



Sunday, May 12, 2019

Dealing with dishwasher failures

Albeit 10 years of flawless operation can be considered quite good for a home appliance, still when it finally fails, there is the brief criticizing thought of "why didn't it last longer? Bloody programmed obsolescence in modern industry!" ..and so on and so forth.

Well, the truth be said, 10 years of operation without a single glitch is either a product of sheer luck (i.e. one golden batch in the production line), or the brand really went serious with quality and the strategy at the time didn't include the need for recovering the same consumer soon in the product life cycle.

I can say this from the Whirlpool dishwasher model ADP 6837/1 that I have been using since 2009. During 10 years it never complained, while we threw dirty dishes at it on a daily basis.



Wednesday, April 17, 2019

Once again bumping into questionable product safety standards



About 6 months ago, I replaced the manual plastic pump I used to have for dispensing water from 5+ litre jugs, with what would in principle be a more sophisticated and convenient approach: looked for an electric water dispenser, and without much searching, found several options. Most, if not all were unfortunately designed to fit into the 19 litre office water bottles. Without any alternative, ordered one of these, considering that I would have to come up with some custom adaptation if I wanted to use it with the 5 litre bottles. Ended up ordering the one below, for its minimally elegant design and compact dimensions:


Wednesday, January 30, 2019

Car DVR replacement and related shenanigans - part 2

Moving along with more details, like I mentioned in the previous post, the rear camera was reused from the previous installation. This CCD based camera happens to be superior to the basic CMOS camera bundled with the kit. Both in terms of the quality of the sensor itself and its low light sensitivity, but also regarding the lens, featuring a wider viewing angle (important given its role as a backup camera).

The only change however was a substantial improvement in the mounting design, by having added an U-shaped plate in the rear of the camera, with a 4-screw mount instead of the original 2 screws attached to the sides of the camera. This provides a more solid attachment to the L-shaped aluminium parts that in turn stick to the door through an adhesive:


Sunday, January 27, 2019

Car DVR replacement and related shenanigans

Introduction

With the vulgarisation of miniature cameras and computing devices of all sorts, technologies that fundamentally serve the mobile industry become cheap enough and available to the point of being useful for other purposes. That is the case of DVR devices for automotive use.

Saturday, January 5, 2019

Adding metalurgical capability to a biological microscope - part 2

Like I had previously explained, I was able to obtain from eBay (for a minimally decent cost), just the bare vertical illuminator, which didn't include any accessories. The light house was not an exception. The vertical illuminator consists the main body:



and the light house, which in the original device would be based on a halogen bulb of at least 15-20 Watts: